Scientific Temper

Nuclear technology

Nuclear fundamentals and radioactivity

In a nutshell

The nucleus is held together by the strong nuclear force and stores enormous energy. Unstable nuclei transform spontaneously into more stable ones, releasing alpha, beta or gamma radiation, and they do so at a fixed rate described by the half-life.

  1. Alpha: helium nucleus; low penetration, very high ionisation; stopped by paper or skin, but harmful if inhaled or swallowed.
  2. Beta: high-speed electron or positron; moderate penetration; stopped by thin aluminium or plastic.
  3. Gamma: high-energy electromagnetic radiation; high penetration; needs thick lead or concrete.

Activity: becquerelAbsorbed dose: grayEffective dose: sievert

A gram of uranium-235, if fully split, releases as much heat as about three tonnes of coal (see the table in the chapter opening). Where does that energy come from? And why do some atoms give off radiation on their own while others never change? This topic answers both questions.

The nucleus: a store of energy

As we know, an atom consists of a nucleus surrounded by electrons. The nucleus is made up of two kinds of particles called nucleons:

  • Protons: positively charged particles.
  • Neutrons: particles with no electric charge.

Now, protons are positively charged and therefore repel one another. Then how are they held together inside the nucleus?

There must be another force that overcomes this repulsion. This is called the strong nuclear force. It is this force that helps bind protons and neutrons together inside the nucleus.

The nucleus is also a store of enormous energy. Under suitable conditions, changes in the arrangement of protons and neutrons can release part of this energy. This is the basis of nuclear energy.

Nuclear stability and radioactivity

Not all nuclei are equally stable. The stability of a nucleus depends on several factors, including the balance between protons and neutrons and the forces acting within it.

Some nuclei are stable and remain unchanged. Others are unstable and tend to transform into more stable nuclei. This spontaneous transformation of an unstable nucleus is called radioactive decay, and the phenomenon is known as radioactivity. During radioactive decay, the nucleus releases particles or electromagnetic radiation.

For example, Uranium-238 and Thorium-232 are radioactive isotopes that undergo decay naturally.

An important point is that radioactivity is a nuclear phenomenon. It involves changes in the nucleus, unlike ordinary chemical reactions, which mainly involve the rearrangement of electrons.

Types of nuclear radiation

Radioactive nuclei can emit different kinds of radiation. Three important types are alpha, beta and gamma.

Alpha Beta Gamma Paper Aluminium Lead
Relative penetrating abilities of alpha, beta and gamma radiation (lead or thick concrete for gamma). Actual shielding requirements depend on radiation energy and material thickness.
PropertyAlphaBetaGamma
NatureHelium nucleus: 2 protons and 2 neutronsHigh-speed electron or positronHigh-energy electromagnetic radiation
Electric charge+2−1 or +1No charge
Penetrating abilityLowModerateHigh
Ionising abilityVery high over a short distanceModerateGenerally lower per unit distance
ShieldingPaper or outer layer of skinThin aluminium or plasticThick lead or concrete

Why is nuclear radiation harmful?

When sufficiently energetic radiation passes through matter, it can remove electrons from atoms or molecules. This process is called ionisation.

When ionisation occurs in living tissues, it can damage important molecules, including DNA. Depending on the radiation dose and circumstances, the damage can lead to cell death, tissue injury or an increased risk of cancer.

However, the biological effects depend on the type of radiation, the dose received and whether the radioactive material is outside or inside the body.

For example, alpha radiation has very low penetrating ability and is generally stopped by the outer layer of skin. But alpha-emitting radioactive material can be particularly harmful if inhaled or swallowed.

This distinction between penetrating ability and biological harm is important.

Half-life: how long does radioactivity last?

We have seen that an unstable nucleus undergoes radioactive decay. But does every radioactive nucleus decay immediately? Does all the radioactive material disappear after a particular time?

Not so. Radioactive decay follows a characteristic pattern described by half-life.

Half-life is the time required for half of the radioactive nuclei in a sample to decay.

Suppose we have 100 grams of a radioactive isotope with a half-life of 10 years.

  1. Initially100 g
  2. 10 years50 g
  3. 20 years25 g
  4. 30 years12.5 g
  5. 40 years6.25 g
After every 10 years, half of the radioactive nuclei remaining in the sample have decayed.

Notice that after the first 10 years, 50 grams remain. In the next 10 years, half of the remaining 50 grams decay, leaving 25 grams. The process continues in the same manner. Therefore, after four half-lives, 6.25% of the original radioactive nuclei remain.

Two important observations follow:

  • Half-life is characteristic of a particular radioactive isotope. Some isotopes have half-lives of seconds, while others have half-lives of millions or billions of years.
  • A radioactive sample does not become completely non-radioactive after one half-life. Its activity progressively declines as radioactive nuclei decay.

Why is half-life important?

Different radioactive isotopes decay at different rates. Once we know an isotope's half-life, we can use its remaining quantity or activity to estimate how much time has passed. This is the principle behind radiocarbon dating and several geological dating techniques.

Half-life also helps us understand how long radioactive materials remain active, an important consideration in nuclear medicine and radioactive waste management.

Measuring radioactivity and radiation

Three terms are particularly useful.

TermWhat it measuresUnit
Radioactivity / ActivityNumber of nuclear decays occurring per secondBecquerel (Bq)
Absorbed doseEnergy deposited by radiation per kilogram of matterGray (Gy)
Equivalent / Effective doseRadiation dose adjusted for biological effects; effective dose also accounts for tissue sensitivitySievert (Sv)

A radioactive source may have high activity, but that does not automatically mean a person receives a high radiation dose. The actual exposure depends on distance, shielding, duration and other conditions. This distinction becomes useful when discussing radiation safety and nuclear accidents.

What have we understood?

The nucleus is held together by nuclear forces and can store enormous energy.

Some nuclei are unstable and undergo spontaneous transformations, releasing nuclear radiation. Alpha, beta and gamma radiation differ in their nature, penetrating ability and biological effects.

Radioactive decay follows the principle of half-life, which allows us to estimate the passage of time and understand how radioactive materials behave.

These properties are what make radioactive isotopes useful in medicine, archaeology, geology, industry and space exploration. The next lecture examines these applications.

Recent developments

No dated updates for this topic yet.

Last-month notes
  • Alpha: helium nucleus, +2; stopped by paper or skin; most ionising.
  • Beta: electron or positron, −1 or +1; stopped by thin aluminium or plastic.
  • Gamma: electromagnetic radiation, no charge; needs thick lead or concrete.
  • Units: activity in becquerel (decays per second); absorbed dose in gray (energy per kg); effective dose in sievert.
  • After four half-lives, 6.25% remains.

Statements to watch for

  • Low penetration does not mean low harm: alpha emitters are dangerous inside the body.
  • High activity does not automatically mean a high dose to a person.
  • Radioactivity is a change in the nucleus, not a chemical change.

Revise and apply

Activities to check your understanding, not new content. Answer first, then press Check or Show answers. Multiple-choice questions are original, in the UPSC style, not past UPSC questions. A printable workbook with all activities is on the theme page.

Complete the mind map

Type the missing words, then check.

Radioactivity
Why do nuclei decay?
Nucleons held by the force
Unstable nuclei change to be
A nuclear, not , change
Three radiations
Alpha: a nucleus
Beta: a fast or positron
Gamma: radiation
Penetration
Lowest: ; stopped by paper
Highest: ; needs lead
Most ionising:
Half-life
Time for of a sample to decay
Fixed for each
After 3 half-lives: % left
Units
Activity:
Absorbed dose:
Effective dose:
Fill in the blanks
  1. Alpha particles are the most radiation but the least penetrating.
  2. Gamma rays are stopped only by thick or concrete.
  3. A source with high activity does not necessarily give a person a high .
  4. After four half-lives, % of the original sample remains.
  5. One sievert equals rem.
Put in order

Arrange the three radiations from least to most penetrating. Click the items in order.

    True or false? Correct the false ones
    1. Radioactive decay is a chemical reaction.
    2. An alpha emitter is harmless because a sheet of paper stops alpha particles.
    3. The half-life of an isotope cannot be changed by heating or pressure.
    4. The sievert takes into account the type of radiation and the tissue exposed.
    Decode the headline

    "Radiation levels near the plant remain within normal limits, at a few microsieverts per hour." (a) What does the sievert measure? (b) Why quote sieverts and not becquerels? (c) Does the presence of radioactive material always mean a harmful dose?

    UPSC-style question 1

    Consider the following statements about alpha radiation:

    1. It consists of two protons and two neutrons.
    2. It can be stopped by a sheet of paper.
    3. Since it cannot penetrate skin, an alpha-emitting substance is harmless even if swallowed.

    Which of the statements given above is/are correct?

    UPSC-style question 2

    A sample of a radioactive isotope with a half-life of 8 days weighs 80 g. How much of the isotope will remain after 24 days?

    UPSC-style question 3

    Which unit measures the number of radioactive decays per second in a sample?

    Write in about 50 words

    Why is an alpha emitter harmless outside the body but dangerous if inhaled?

    0 words
    Write in about 50 words

    Why does the half-life of an isotope decide what it can be used for? Give one example.

    0 words

    The next question Radioactivity is not only a hazard. How do we put it to use?